Disassemble CPU
Step 1:
We have to remove the screws on each side cover. Using the screwdriver we will use throughout the removal.
Remove the screws and slid the covers back and are located in a place where they will not interfere.
Step 2:
We proceed to disconnect the power supply from the motherboard and each of the devices. 8 buses both card and computer components are also disconnected.
Labeling is important We disconnected the buses on the motherboard and drives.
Step 3:
Connectors loud, hard drive, power supply, etc. are disconnected In this case security is not what should be done if not necessary, because the disconnect these devices but there is information on how the structure and location to support dismantling the risk of connecting the wrong way and run the computer malfunction.
Remove each of the devices, disk drives, CD-ROOM, drive.
Step 4:
With great care we take also the memories of their slots, taking them to the edge if not to touch the circuit, preventing any damage suffered.
17 12 With the help of screwdriver also we draw additional cards held by the computer, such as video, television, sound, etc. 13 The battery could also be removed, as long as you do it carefully.
Step 5:
Upon removing the processor the importance of an antistatic handle stands out, to prevent our energy will do some damage. First we extract the fan covers and then raise the lever clamp to remove the CPU and placing it in a special safe place while the other components are extracted.
We raise the insurance that covers the processor fan to remove. We observe the brain of the computer.
Assemble CPU
When you disassemble the computer the steps made to remove is the same way to assemble exercise caution when connecting cables in parts of devices and cards that can damage your computer system so already accommodated the computer assembly screws so that when the computer cover is closed.
Diagram
